ReyLight Copper AAA/10440 Kit + Battery + Smart Charger
ReyLight Copper AAA/10440 Kit + Battery + Smart Charger
High performance Nichia 219B 4500K R9080 high CRI LED
+ Glow O-ring
500 Lumens!
Out First Programmable Push Button Flashlight
Includes 10440 Battery + Smart Multi Charger
Input DC 5V 2A+
Charging Output for 10440 Battery 4.2V @ 1A Max
Note only charge at .5A-1A for 10440 Cells to safely prolong the battery life upto 500+ cycles
--------------------------------------
We have received hundreds of emails asking for a light that uses a 10440 cell battery. We now have the ReyLight Copper AAA/10440 light which works with both cell variants.
Why use a 10440 Lithium cell? Higher voltage = Much brighter & also rechargeable
Why use standard AAA? Convenience and no need to worry about charging
Add a spare battery ( Here )
Specs
- Using single AAA battery, max 125 lumens, or 10440 Li-ion battery, max 285 lumens.
- Size: 89mm length (including the switch button) diameter: 15mm
- Weight: 52 grams
- Copper Billet
- 4 modes of brightness & fully programable to with the instructions below
Programing Guide
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Warning: Don't use this cell in any another AAA or Maratac flashlight that you
own as it will void your warranty, and destroy the light.
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH. You MUST read the safety warnings and resources before purchasing, using, and/or handling batteries.
ReyLight Copper AAA/10440 Kit + Battery + Smart Charger in Action
live Your Gear
At CountyComm, we're dedicated to excellence, unwavering quality, and innovative solutions. For over 30 years, we've relentlessly provided top-notch tactical gear designed to outlast your adventures.