Pen Light 10880 / AAAx2 ReyLight Combo + Battery!
Pen Light 10880 / AAAx2 ReyLight Combo + Battery!
Limit 2 Per Customer!
Nichia 519a 4000K LED.
New For 2024 - > 500 Lumens Max!
Double The Runtime!
Gen 2 Upgraded Integrated Clip + Glow O-ring
Out First Programmable Push Button Flashlight
Includes 10880 Battery With Built In Charger - Just use a micro USB cable to charge!
--------------------------------------
We have received hundreds of emails asking for a light that uses a 10880 cell battery. We now have the ReyLight 10880 / AAAx2 light which works with both cell variants.
Why use a 10880 Lithium cell? Higher voltage = Much brighter & also rechargeable
Why use standard AAA? Super easy to find and have spares on hand
Specs
- Using 2x AAA battery, Min 1 - max 145 lumens,
or
10880 Li-ion battery, Min 1 - max 500 lumens.
You can also use a normal 10440 protected battery plus a dummy AAA cell. Please Do NOT use double 10440.
You can use either 1a or 2a usb adaptor, and a micro usb cable to charge it. When charging, it has red light, when fully charged, it will turn to blue. It usually takes 3 hrs from empty to full charging.
- Size: 134mm length (including the switch button) diameter: 15mm
- Weight: 74 grams
- titanium
- 4 modes of brightness & fully programable to with the instructions below
No Cable Included
Programming Guide
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Warning: Don't use this cell in any another AAA or Maratac® flashlight that you
own as it will void your warranty, and destroy the light.
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH. You MUST read the safety warnings and resources before purchasing, using, and/or handling batteries.
Pen Light 10880 / AAAx2 ReyLight Combo + Battery! in Action
live Your Gear
At CountyComm, we're dedicated to excellence, unwavering quality, and innovative solutions. For over 30 years, we've relentlessly provided top-notch tactical gear designed to outlast your adventures.